About HKTDC | Media Room | Contact HKTDC | Wish List Wish List () | My HKTDC |
Save As PDF Email this page Print this page

EU Restricts Phenol in Certain Toys

Photo: Toys
Photo: Toys

The EU has recently amended the Toy Safety Directive (TSD) to include the restriction of phenol in certain toys. The restriction will become effective on November 4, 2018.

In October 2014, we [1] informed you that the World Trade Organization (WTO) had circulated a proposal from the European Union (EU) to regulate six chemicals in toys for children less than 36 months or other toys intended to be placed in the mouth under Appendix C of Annex II to the TSD. These six chemicals are:

  • Four preservatives (BIT, CMI:MI (3:1), CMI and MI)
  • Formamide
  • Phenol

In November 2015, the EU published regulations to restrict BIT, CMI, CMI:MI (3:1), formamide and MI. The restriction of these five chemicals [2] will be implemented in two phases starting on May 24, 2017.

On May 4, 2017, the EU published Directive (EU) 2017/774 [3] to restrict phenol (CAS 108-95-2), a mutagenic category 2 substance, in toys falling under Appendix C of Annex II to the TSD. There are two sets of limits:

  • No more than 5 mg/L for migration from polymeric materials
  • No more than 10 mg/kg for content when used as a preservative

The new restrictions will become effective on November 4, 2018.

Highlights of the new law are summarized in the table below.

SubstanceScopeToy material or applicationMethodRequirementEffective Date
Phenol
  • Toys for children under 36 months
  • Other toys that can be placed in the mouth
 
PolymericEN 71
Parts 10-11
≤ 5 mg/L (Migration)November 4, 2018
As a preservative≤ 10 mg/kg (Total content)

Directive (EU) 2017/774 amending Appendix C of Annex II to the TSD

Phenol has a number of applications in toys, including:

  • As an antioxidant in polymers
  • As a monomer for phenolic resins in the manufacture of resin-bonded wood
  • As a preservative in toys containing water (water-based liquid toys) such as bubble-blowing products and felt-tipped marker pens
ItemAcronymCASChemical
1
BIT2634-33-51,2-Benzisothiazol- 3(2H)-one
2
CMI26172-55-45-Chloro-2-methylisothiazolin-3(2H)-one
3
CMI:MI (3:1)55965-84-95-Chloro-2-methylisothiazolin-3(2H)-one (CMI) and
2-methylisothiazolin-3(2H)-one (3:1 mixture)
4

75-12-7Formamide
5
MI2682-20-42-Methylisothiazolin-3(2H)-one

Definitions

SGS offers a wide range of services to ensure that your products comply with the EU Toy Safety Directive. We offer training, safety/risk assessment, technical documentation check, labelling review, testing according to harmonised standards, SVHC screening, inspections and audits. With the largest global network of toy experts and testing facilities around the world - around 20 toy labs worldwide including 3 EU Notified Bodies (France, Germany and Netherlands), SGS is the partner to trust. Please do not hesitate to contact us for further information or visit our website.

Email SGS Hong Kong Ltd. at mktg@sgs.com for enquiry or visit www.sgsgroup.com/hk.

Content provided by SGS Hong Kong Limited
Comments (0)
Shows local time in Hong Kong (GMT+8 hours)

HKTDC welcomes your views. Please stay on topic and be respectful of other readers.
Review our Comment Policy

*Add a comment (up to 5,000 characters)